how to remove the back of a dining room chair

My mom still has her original dining room set from 35+ years ago when her an my dad got married and the dining chairs are in desperate need of being reupholstered. I just need to suck it up and do it. Your staples should be about 2 inches apart at this point, 1 inch from the edge of the plywood.Remove the heavy object. Good times.That black stuffing part is the best. The seat and back plywood cushions are then hot-glued, screwed on or pin-nailed to the hardwood frame.

I admire people who have the bravery to tackle projects like this. Rip that black fabric stuff off the bottom and start prying out even more huge nails to free up the jute webbing.The nails really are as huge and scary as they look.Now spend another 45 minutes of your life that you will never get back removing the remainder of nails and staples covering the chair from head-to-toe.

I probably got lung cancer from taking these chairs apart. This is Part 1 of a three-part series on Reupholstering Dining Chairs with two padded back panels. Also, I have never done this before, so I may not have even done it the right way. Once the stain is dry, apply a coat of polyurethane to give your chairs a protective finish.

Chairs are finished reupholstering actually i moved all the best vintage and it done with a spring in your room. To begin the process of removing the upholstery from a dining chair, let’s start on the easiest part; the back of the chair. Alternately, use a steamer with a nozzle that directs the steam at the part of the frame that supports the edges of the cane and channel that holds the spline.Cut and pull the spline toward you at a low angle beginning in the middle of a side of the frame -- pulling straight up or back will cause the spline to break. Coil siding nail per box collated siding nails.

Reupholstering old chairs is an inexpensive way to give a whole room a face lift. Try. Just pull it off and throw it right in the trash.And now, again, like you did above, cut the leather around the entire perimeter and remove it. Blisters!! I have now subscribed. I have only tackled one of the 6 chairs I bought to update my dining room and thought I was in over my head! Insert a screwdriver between the chair frame and the back cushion. I’m just here to share my experience, not to claim I’m an expert or anything.Note: These dining chairs have springs in the seat instead of a wooden seat that can easily be removed.

I dare you. Using a pair of scissors, cut the fabric so that it is big enough to wrap around the edge of the plywood cushion on all four sides by at least 3 inches.Place a heavy object on the back of the plywood to compress the foam underneath it as much as possible.Pull the fabric up from one corner. We are finally to the springs. Shaddy has also worked as a newspaper reporter and writer, and as a contributing writer for Bicycling Magazine. Furniture covers theyre machinewashable just toss in johannesburg south home garden search gumtree free online classified ads for headboards in joburg in joburg in randburg we reupholster couches chairs if it yourself. Eventually.OMG she started the chairs! I was thinking of leaving the seat cushions in tact. There are most definitely real-for-real upholstery tools you can buy to do a better job, but I’m cheap so I just toughed it out with a flat-head screwdriver and a good pair of needle-nose pliers.After TWO FREAKING HOURS you will finish ONE chair, & you will have a pile of trash that looks about like this:Now times that by ten and that is what I had to endure. I’ve already Disclaimer: Upholstering is very specific to each individual project, so just because I did it this way does not mean it’s the only right way or that you have to follow these exact steps when tackling your own chairs. See Part 2 HERE and Part 3 HERE. Once you get all the nails out, you need to take the rest of the batting and innards stuff off the back of the chair.More nail prying time! If you want to reupholster dining room chairs, you’re in for a long project. Since we moved in with my parents in 2008, my mom has disassembled the dining set and it’s spread throughout the house and many of the dining chairs are in our storage sheds. Back in the dining room, use fully upholstered chairs per your original (ha!)

And I’m so happy I’m done.Fortunately I do have this adorable boy that was more than willing to help out; but only if he was allowed to use a screwdriver and the knife cutter thing-a-ma-jig. !I’ve got a long way to go before I can check the finished chairs off Removing the old upholstery on these chairs was quite the project. How To Remove Seat Cushions On Dining Room Table Chairs.

Here’s the first tutorial in a step-by-step series on upholstering wooden dining chairs.Today I’m finally going to tackle phase 1 of my dining chairs upholstery project! Run a mat knife along the frame on the inside of the panel and remove the caning. Be careful not to cut or dig any wood out with the cane.Once all of the spline and cane have been removed, clean the glue out of the corners of the inset with a putty knife.Clean the remaining glue off the inset in the frame and the spline channel. Repair a Dining Room Chair: This Instructable details how to repair a dining room chair when it has been broken by someone leaning back on the hind legs. Just sayin’. Its the perfect opportunity to unite the two spaces without being too matchy, matchy. Shoot one staple 1 inch from the corner. It was brutal. Allow it to heat up. but that requires W-O-R-K which is kind of a turn-off for me. It was suppose to be one of several in an ongoing series about upholstering dining […][…] dining room is getting tinkered with again. A few inches of caning and the splining will remain around the frame of the chair back. Press the cushion back into the chair frame and press it into place with your hands to finish.Specializing in hardwood furniture, trim carpentry, cabinets, home improvement and architectural millwork, Wade Shaddy has worked in homebuilding since 1972.