tow dolly tongue height

The higher you raise the the tongue the lighter the tongue weight feels. That is a difference of 6 inches. It measures 22 inches from the bottom of the receiver to the ground. Dual Safety Chain Set. We thank you for your understanding.Copyright © 2020 - Car Tow Dolly - All Rights Reserved After looking at several trailer dollies on the Internet, I noticed that higher end models had two key features lacking in cheaper designs: This weight includes driver, passengers, cargo and any additional equipment.

It also details our return policy.By agreeing to our terms of purchase, you’re making a promise not only to us, but also to your bank. ( we once had a repair center that wanted $189.00 for $7.00 worth of parts ) Our warranty excludes labor charges however depending on the circumstances and age of the dolly we may offer reimbursement at a reasonable rate. No. Another way to prevent getting this page in the future is to use Privacy Pass. We have nothing used for sale.

Tow Dolly Ships To the (Nearest XPO Destination Center) Tow Dolly Specifications. It is designed to sit at about 14" off the ground, but my RV's hitch receiver is 24" off the ground...so, to reach level, would require a 10" drop hitch. To coincide with this agreement, this means we do not accept returns, refunds, or chargebacks. The answer in Step 3 is the amount of weight you can put in your tow vehicle. 6,500lb Lashing Winches. We can send you all the parts you will need. While my 20 foot trailer weighs about 4,000 pounds, the tongue weight is only around 400 pounds, well within the capacity of the 1,000 pound Tow Tuff trailer dolly. Our competitors warn you in their owner’s manual not to tow their dolly more than 50 miles unloaded. Acme recommends a tongue height of 14-16 inches. The coupler height is 18 inches on the dolly. If the rear of your tow vehicle seems low, reduce the load in the rear seat, trunk or cargo bed areas. On a properly loaded tow dolly the tongue weight will always be 10-15% of the weight over the axle of the tow dolly. Heavy-Duty Spindles & Cast Hubs w/ Easy Lube Hub. Our Car Tow Dolly design allows you to stand all the way straight up, making maneuvering the dolly much easier.

When measuring the ball height of a trailer or dolly, like part # RM-2000-1, you measure from the ground to the bottom of the coupler.In order to tow the dolly level you also want to measure from the ground to the top inside edge of your vehicle's trailer hitch receiver tube. Right at 70 lbs in your hands.

The higher you raise the tongue the lighter the tongue weight feels. No returns, no refurbs. Tongue height for Eze-Tow Dolly. Lightest tow dolly weighing in at 330-380lbs EZE Load Ez Haul. This accounts for tow dolly tongue weight. On a properly loaded tow dolly the tongue weight will always be 10-15% of the weight over the axle of the tow dolly.

Completing the CAPTCHA proves you are a human and gives you temporary access to the web property.If you are on a personal connection, like at home, you can run an anti-virus scan on your device to make sure it is not infected with malware.If you are at an office or shared network, you can ask the network administrator to run a scan across the network looking for misconfigured or infected devices. The only car dolly in the market thats able to Store vertically and haul 5,000lbs. Powder Coat Finish. Our brake design exceeds all federal requirements in the US and Canada.Yes, you can tow our tow dolly unloaded for as far as you want. Ships Tow Ready for just $250.00. Tow Capacity - 4900 lbs. FYI, since 2006 we have had a .04 percentage of warranty claim history.In addition, it allows us to confirm in writing what you have purchased. A ball mount should be selected that has the proper rise or drop so that the dolly is riding level on the axle. We recommend storing the ramps in your vehicle for unloaded travel.We require that you contact us regarding any warranty claim. Two Models to choose from. Heavy Duty Frame. My dolly has surge brakes which require a more-or-less level braking master cylinder (mounted on the front end of the tongue). Overall Dimensions L x W x H (in) - 123 x 102 x 27 1/4. We know what it takes to repair a dolly.That is why we want you to call us first. The trailer tongue and coupler height are fixed, they are not adjustable. I am days away from ordering an Acme Eze-Tow Dolly that I will be towing behind a Winnebago Vista 29VE. This helps prevent the potential for price gouging from a repair center. Our website has a mention of used dollies, but that is simply a meta tag for Google search purposes.Yes.