suction side pool water leak

It is either a rigid or a flexible PVC pipe, and is hooked up directly to the pump.

I don’t see where the water is coming out anywhere, so it must be under ground. Allow it to dry for about 10 seconds before proceeding.Apply the cement to the inside of the coupling and the outside of the pipe. This will clean the pipe and prepare the PVC for the cement solvent.

Or the pump wont even be able to suck water, only air. Or do I have multiple leaks? A swimming pool suction line channels water from the pump into the pool filter. He has been published in "Woman's Day," "New Home Journal" and on many do-it-yourself websites. Prices, specifications, and images are subject to change without notice. In each case, the repair will be the same.Turn off the pump to put positive pressure into the suction line.Look for wet areas around the line that are leaking, to determine the precise point of the leak. A dripping pipe in an above-ground installation is a sure giveaway, but with an underground system, look for an area on the ground that is constantly wet and possibly muddied with water pooled on the surface.Cut out the area of the leak in the PVC line.

Inspect each of the above.

Yalanovsky also writes a bimonthly column that provides home improvement advice. > Suction side plumbing leak.

Make the cut as straight as possible with a fine-toothed saw. Signs of water damage to pool deck or yard.

This means that we likely stock the product and parts you need and can get them to your pool fast! He specializes in do-it-yourself projects, household and auto maintenance and property management. This will remove burrs and other impurities, and it will also allow the cement to get a bite when the PVC pieces are joined together.Put the coupling on the end of the line to dry fit the pieces together.

In a minor case you will just see a tiny stream air bubbles under the pump lid. If a joint is leaking, cut the joint out. Not responsible for typographical or illustrative errors. A swimming pool suction line channels water from the pump into the pool filter. With my luck that would be my guess. We order and receive product daily from all the major pool manufacturers. A suction side air leak is most commonly indicated by air under the pump lid.

Depending upon your type of pool system, the suction line will be placed above or below ground. A hacksaw works well for this purpose.Sand the pipe and connector with 80-grit sandpaper. 99% of the times its something very simple. In the case of a really bad suction air leak you will see a lot of air and the water will be splashing around under the pump lid. Manufacturer rebates, terms, conditions, and expiration dates are subject to manufacturers printed forms. Mark a straight line, with a marker, on the pipe and coupling for orientation. How to Remove a Leak in the Suction Line of Swimming Pools. So I’m getting air in my pump basket window and I’m losing 3/4” of water each day. Leak Repair Once pushed together, turn the pipe until the orientation marks are lined up. Hold them together for about 15 seconds to let the PVC cement cure.Attach the other end of the cut pipe inside of the coupling in the same way.Dale Yalanovsky has been writing professionally since 1978.

Is it normal to lose water with a suction side leak?

Push the pipe inside of the coupling at about one-quarter turn from the orientation mark. Good advice is not to waste your time looking around the filter or other equipment, where an air leak can not be produced. Pooling water on or around the pump. Below-ground systems mean digging out the suction pipe for repairs, while above-ground pipes allow repairs by working with the pipe only. Remember it is some place between the pump and the pool. Rapid water loss. PVC couplings and accessories are available at hardware stores or pool and spa shops.Wipe the inside of the coupling and the outside of the pipe with PVC primer.

Some signs that a suction side plumbing leak has occurred include: Dripping, leaking or spraying water at the connection site to form the pipe to pump.