philips hue light strip mounting

Hauteur The officially supported method is to use scissors and trim the strip to the desired length, but the part that you cut off becomes unusable. Adaptateur secteur It will still work if you get it backwards, but the connectors won't sit flush while mated.Both your light strips and your cables have exposed solder connections. 5 %

Et la couleur de votre Philips Hue Lightstrip Plus reste uniforme, de la première à la dernière extension. The important part about these connectors is that they are "machine pin" style, meaning that the pins and sockets are round. You want the entire length of the joint exposed, plus a bit extra to give you some room to work. matières synthétiques 14,000 This is where the manufacturer says to cut the strip to make it shorter.

Peut être coupé

Use a helping hands tool to hold the strip (grip it close to the area where you're working) and apply a blob of solder to each of the pads. Largeur

I made sure that my cables always had that red line facing the back wall. 7,500 I melted the solder using a soldering iron and used a solder sucker to remove the solder from the top of the connection. Instead of having a single connector on the very end, we're going to replicate that connector on the end of each individual sub-strip. Philips Hue Lightstrip Plus 1M Extension Using the 1M extensions from Philips you can extend your Hue Lightstrip  Plus up to a total of 10m or 33ft.

Using the same connector enables us to seamlessly add extension strips if needed.The ribbon cable was leftover from a previous project. I cut the squares into thirds to get get long, thin strips that were roughly the same width as the cable. Close.

Installing Light strips in the Kitchen. Simply peel off the paper backing and stick them wherever you want them to go. Outdoor use.

The male connectors are "through-hole" style (straight on both ends). Published January 25, 2018. Posted by 2 years ago. 2 ans Extendable up to 5 meters, our Lightstrip can do what no other light can. Don't expose any of the electronic components, though.Once the joint is exposed, remove the solder from the joint and separate the two strips. Hue Lightstrip Mounting Options. There are a couple of different ways you may need to extend your lightstrip, either lighted with LEDs or non lights for bridging a gap that you don’t want lights on. Philips sells extensions to make your light strip longer, but making them shorter was a problem. Peut être agrandi

cm Instead, there's a soldered connection next to the cut line that we're going to remove and replace with a connector.Thankfully, we don't have to invent a connector system to use here.

Heat shrink tubing would have been a better option, but I didn't have any that would work on a connection this size and shape.Decide where you want to mount each of the strips.

Even with no visible solder the strips were Soldering the connectors is a bit tricky. By using the same connector, we retain the ability to connect an extension. multicolore

Avec des millions de couleurs parmi lesquelles choisir et d'innombrables options d'éclairage, vous pouvez transformer n'importe quel salon en cinéma privé : il vous suffit d'apporter le popcorn !Lumière chaude ou froide pour une meilleure ambianceAutomatisez les éclairages grâce aux programmations Synchronisation des éclairages avec la musique et les filmsFaites passer votre gaming au niveau supérieur avec un éclairage synchronisé Température de couleur You have to hold the strip and the connector in place, plus have free hands to hold the solder and soldering iron. If you're an octopus or if you have an assistant, you can probably solder these the traditional way.If you're doing this by yourself, solder the connector in two steps to minimize the amount of hands you need at any given time.